Trident Plastics’ four-wheel bins

Screen Shot 2017-04-07 at 2.46.42 pm

Trident Plastics, the largest custom moulder in South Australia, has launched a new range of Australian made four-wheel bins for commercial and multi-unit dwelling use. The new 660 and 1100-litre bins are made of injection moulded high-density polyethylene (HDPE), which is UV stabilised to provide “excellent strength and durability”, as Trident explains, adding: “With our four- wheel bin range, we aim for excellent value for money in the same way that our two-wheel bins have become so popular in Australia and New Zealand in recent years.”

Featuring flat sides to enable pockets to be installed, as well as high quality wheels, two with locks, and noise reducing tyres, the new four-wheel range comes fully equipped and will be available in a whole range of colours for both body and lid.

Trident Plastics commenced manufacturing two- wheel bins in 2012 and has since increased its range each year. Now supplying 80, 100, 120, 140, 240 and 360-litre two-wheel bin sizes, the young company says the new four-wheel options further complete its portfolio.

All two and four-wheel bins are made under strict quality and environmental standards, such as ISO 9001 and ISO 14001.

www.tridentaustralia.com

TailGuard for garbage vehicles

WABCO Trailer Remote Control
Sensoren und Anzeige am Kundenfahrzeug

Reversing is one of the most dangerous truck operating procedures, which is why WABCO’s TailGuard was designed to help reduce fatalities on the road by detecting small, large, static and moving objects in the blind spot behind a vehicle.

The device is automatically activated when the gearbox is shifted into reverse, with TailGuard detecting all objects within three metres of the vehicle. The Trailer
Remote Control is activated, and a warning

signal sounds to indicate to the driver that the system is active. It also automatically stops at a programmable distance between 50cm and 200cm, so the driver can then slowly reverse the last few centimetres, if needed.

An easy to operate remote control includes an audible alarm, distance indicator and function buttons. The company notes its defining features which make it a unique solution, including ultrasonic sensor technology, allowing for object detection in conditions with poor visibility and complying with best-in-class automotive standard ISO 12155 for reversing systems for commercial road vehicles.

The system also comes with a cabin-mounted device for the driver indicating the distance. The combination of TailGuard and braking technology provide unique functions, including automatic stopping, forced slowing and distance programmability. In addition, the system can be retro-fitted before, or during a new build.

www.wabco-auto.com/wabco

CAT Microgrid Master Controller

IMAGE for Energy Power Systems Australia

Caterpillar has expanded its power generation offering into renewable energy. The company has developed a strategic partnership with First Solar to create an integrated photovoltaic (PV) solar solution for microgrid applications, which are used in various applications.

The Cat renewable energy system is powered by thin-film solar panels, with performance efficiencies over other types of solar panels. The thin-film technology has a lower temperature derate ratio, so installed in an application where the operating temperature is greater than 30°C, the panel operates more efficiently than other solar options. A key component in the Cat Hybrid Microgrid system is the Cat Bi-directional Power Inverter (BDP).

The BDP inverter includes the robust Cat power electronics system. This is known for its operational capabilities, having been used in the Caterpillar D7e hybrid tractor, and ideal for the harsh Australian climate.

The energy storage technology includes lithium ion and the revolutionary zinc metal-air energy storage system. This storage system is one of the lowest cost electricity storage options available. The system includes standard integrated controls and battery monitoring at the cell level. A fully flexible offering enables a combination of these two technologies, while Catepillar’s engineers design the energy storage system according to the needs of the business.

Ron Hall, Segment Manager, Hybrid Microgrid Systems from Energy Power Systems Australia (EPSA) says Caterpillar and EPSA recognise the need to live in a sustainable manner with our environment.

“This new product range is the culmination of millions of dollars in research and development over several years. It combines high performance, project integration and after sales service with state of the art renewable power and the revolutionary Cat energy storage system.”

www.cat.com

Fuso Canter E-Cell

Fuso eCANTER, Exterieur, mittelblau metallic, Generator: DC 12 V 250 Amp, HV Batterie: 70 kWh, Motorleistung: 185 kW, Leergewicht: 2.860 kg, Nutzlast: bis zu 4.600 kg, 3 Sitzplätze ;

Fuso eCANTER, Exterior, mid-blue metallic, generator: DC 12 V 250 Amp, HV battery: 70 kWh, Engine power: 185 kW, curb weight: 2860 kg, payload: up to 4600 kg, seating capacity:3;

Fuso, part of the Daimler Group, has announced that its new Canter E-Cell electric truck will make its Australian debut in 2017.

The enhanced version of the Fuso Canter E-Cell electric truck, which was on display at IAA Commercial Show in Germany, has already undergone a number of real-world trials in Portugal.

Fuso Truck and Bus Director, Justin Whitford, has confirmed the eCanter will be involved in a local trial with key customer fleets this year. “We are excited to be able to conduct a local trial with the groundbreaking all- electric Fuso eCanter in Australia,” Whitford says.

According to Fuso, the new eCanter uses a permanent synchronous electric motor with an impressive output of 185 kW and torque of 380 Nm, with power transferred to the rear axle by a standard single-speed transmission.

“They are water-cooled lithium-ion batteries that feature a long service life, high ef ciency, especially at high ambient temperatures, and also compact design of the battery units. Despite the weight of the battery pack, the Fuso eCanter nevertheless boasts an outstanding weight balance: the chassis load capacity of the 7.5-tonne vehicle is 4.63-tonnes including the body and load.

“Individual battery packs with three to six sets of batteries of 14 kWh each are planned for the upcoming small-scale production run. This allows the eCanter to be adapted to customer requirements with regards to range, price and weight.”

Fuso adds that the eCanter’s locally zero-emission drive will not only reduce the impact of exhaust and noise emissions on city centres, but will also be an economically attractive alternative to diesel engines.

 

 

West-Trans launches new waste tarp technology

IMG_7327

New South Wales transport equipment specialist, West-Trans Equipment, is now distributing TransCover tarpaulin systems into the Australian market.

The new tarpaulin technology is manufactured by UK-based TransCover and is purpose-built for the waste transport industry.

According to West-Trans Equipment, the TransCover system is lightweight, easy to install and economical to maintain. “TransCover had achieved this by developing a tarp cover that could operate in unison with a hooklift or a skiploader, which it called a HyCover and a Mini HyCover,” says Les Carpenter, General Manager of the West-Trans Group.

Carpenter says a key feature of the HyCover and Mini HyCover is that both products use air rather than hydraulics to extend the tower, and a high-duty cycle electric motor to extend and retract the tarp. “This results in a system that weighs just under 200kg, which is half the weight of the traditional hydraulically actuated tarps currently being used in Australia, at roughly 70 per cent of the cost.

“In addition, TransCover also manufactured an entry level tarp system to cater to budget-conscious operators, known as the PullCover. The PullCover system is fixed into the load board and operates with a simple spring-loaded drum, similar in operation to a Holland blind. All versions are available with and without side flaps.”

Read more at West-Trans 

Morbark 40/36 Whole Tree MicroChipper

Screen Shot 2017-02-15 at 9.20.45 am

The Morbark 40/36 Whole Tree MicroChipper is a compact, affordable and productive drum chipper designed with the biomass industry in mind. Equipped with the same internal drive perfected on Morbark’s horizontal grinders, along with an extra- wide feed opening, the 40/36 model is meant to “aggressively” feed brushy tops and limbs, quickly and effortlessly lling a chip van to maximum legal load capacity.

At the heart of the MicroChipper is Morbark’s 16-knife Advantage 3 Drum, which is meant to decrease downtime while providing higher-quality, more uniform Micro-Chips. The 16-knife Advantage 3 Drum can also be quickly and easily converted to an eight-knife unit to produce a standard chip.

The feed system, meanwhile, is more ef cient due to a staggered knife con guration and contains fewer moving parts, thus reducing maintenance. In unison with the Morbark Integrated Control Systems (MICS), it automatically adjusts feed rates and monitors pressures and feed wheel position to maximize production and engine ef ciency.

The directional flow discharge chute is hydraulically adjustable by remote control for maximum chip loads. “The Morbark 40/36 Whole Tree MicroChipper is available as either a Wheeled or Tracked unit,” Morbark distributor, Lincom Group, explains, adding that “due to the versatility of the 16 Knife Advantage 3 Drum, and economy, due to low fuel consumption per tonne produced, the Morbark 40/36 MicroChipper is an ideal unit for any forward-thinking business within the Biomass Industry”.

Read more at Lincom Group

Turning time into money

WMR-news-0117-azmeb800

With the acquisition of Perth Waste in June last year, Suez shows no signs of slowing down.

To support its ambitious growth objectives, it relies heavily on its fleet of collection vehicles that were specifically designed for the efficient and safe transport of waste materials between Western Australian sites. Most recently, the fleet has been bolstered with a $3.5 million investment in Azmeb’s High Volume Side Tippers, which Suez’ WA State Equipment Manager, Peter Spight, considers ideal to navigate the difficult terrain and lengthy hauls native to the WA countryside.

“The company was successfully operating these trailers in Cairns,” says Spight, who has been responsible for the purchase of company equipment for over five years. “We collected and viewed the data on the efficiency of the units and bought our first two units in 2013. The quick tip time over our current moving floor fleet and the much lower maintenance were the two key factors in our decision to go with Azmeb.”

Azmeb’s one-of-a-kind tippers can unload up to 10 times faster than traditional moving floor trailers, offering major productivity gains for companies like Suez. The units feature hinged upper bodies which effectively double their volumetric capacity with little increase in tare weight, while their simplified designs require half the maintenance of its moving floor counterparts, according to Azmeb.

Spight says the purchase was approved on a tonnes-per-dollar basis, taking into account costs, maintenance, depreciation and purchase price. When compared to compaction and moving floor trailers, Azmeb’s side tippers came out on top over a seven-year period. “Particularly when considering unloading times, maintenance costs and capital outlay the side tippers ticked all the right boxes,” he explains.

Suez’s new fleet of 14 side tippers, operational since October 2016, are primarily responsible for transporting commercial and household waste from WA Landfill Services’ transfer station in Welshpool to landfill in North Bannister – a 130km trek. The side tippers run in a pocket road train configuration, consisting of seven units each hosting two trailers and a dolly.

Quick tipping times result in less time spent by the road trains at the landfill site, Spight adds, with the fleet managing up to three trips and carting 120 tonnes of waste per day. Further, after identifying that the mix of product was changing towards lower tare industrial and construction waste, Suez was able to specify larger capacity tubs on the new trailers.

The new WA Landfill Services trailers have a total volume of 69m3 compared to the previous trailers, which measured 63m3 – a 9.5 per cent jump in capacity which has helped Suez increase its payload and returns.

To read more, see page 46 of Issue 10.