Feasibility study supports Australian Paper WtE plant

Australian Paper’s $7.5 million waste-to-energy (WtE) feasibility study has confirmed the social, economic, environmental and commercial viability of its proposed WtE facility in Maryvale Mill Victoria.

The study’s summary report highlights the waste management challenges facing south east Melbourne and concludes that Australian Paper’s WtE facility could provide a unique opportunity to address pending landfill closures.

According to the report, the facility could annually prevent 550,000 tonnes of waste from being trucked across Melbourne from municipalities in the south east to landfill sites located in the city’s west.

Australian Paper Chief Operating Officer Peter Williams said the project would result in an investment of over $600 million in the Latrobe Valley, creating 1046 jobs per annum for the three years of construction.

“With Melbourne’s looming landfill challenge Australian Paper’s WtE project is the missing link in waste management infrastructure for the south east – creating efficient energy from residual household and commercial waste and achieving a more sustainable outcome than disposal to landfills,” Mr Williams said.

“By diverting 650,000 tonnes per annum of residential and commercial waste from Victorian landfill, the facility could provide Melbourne with essential waste management and resource recovery infrastructure.”

According to Mr Williams, the facility will reduce CO2 emissions by more than 540,000 tonnes per year.

“By replacing natural gas at the Maryvale site, Australian Paper will return enough gas to the market to meet the annual needs of up to 70,000 Victorian households annually,” Mr Williams said.

“WtE technology is a proven and reliable low emissions technology, meeting the strictest European emissions standards and has been used extensively in Europe, Japan and North America for decades.”

Mr Williams said Australian Paper would now focus on the development stage, working with partner SUEZ  to finalise approvals and seek to secure long term waste supply contracts.

Related stories:

Australian Paper and SUEZ partner on WtE project

Australian Paper has partnered with SUEZ to develop the $600 million Maryvale Mill waste to energy (WtE) project following the successful completion of its feasibility study.

The $7.5 million study was co-funded with the Federal and Victorian Governments.

Australian Paper will now partner with SUEZ  to secure the long-term access to waste required to power the facility.

Australian Paper’s study examined the technical, social, environmental, and commercial feasibility of establishing an WtE facility at Maryvale.

The 18 month study found the facility would operate at a high efficiency of 58 per cent due to the mill’s need for baseload steam and electricity all year round. It would also divert approximately 650,000 tonnes of residual waste from Melbourne and Gippsland landfill, saving 543,000 tonnes of carbon emissions per annum. The new facility would allow the return of up to four Petajoules of natural gas per annum and 30 megawatt-hour per hour of electricity to Victoria’s retail energy market.

Australian Paper Chief Operating Officer Peter Williams said the company is committed to its mission of sustainable growth for the next generation.

“As the largest industrial user of natural gas in Victoria and a significant energy consumer, we must develop alternative baseload energy sources to maintain our future competitiveness,” Mr Williams said.

“Creating energy from waste is a perfect fit with our operations, because in addition to electricity we require significant quantities of thermal energy to generate steam. A WtE facility at Maryvale would secure ongoing investment at the site, support employment growth in the Latrobe Valley and also provide the missing link in Victoria’s waste management infrastructure,” Mr Williams said.

A recent economic impact study from Western Research Institute has confirmed that the WtE facility would support an average of 1046 Victorian jobs per annum during the three year construction period and more than 900 when operational.

Australian Paper and SUEZ will seek to finalise waste supply arrangements for the project by 2020. Construction of the WtE facility is planned to begin soon after with completion expected in 2024.

Environment Protection Authority Victoria granted Australian Paper a works approval to develop a large-scale, WtE facility in Victoria at the end of 2018. The facility is proposed to be co-located within the boundaries of the Australian Paper site in Maryvale, Latrobe Valley and process residual municipal solid waste, and industrial and commercial waste.

EPA grants Australian Paper waste facility works approval

Environment Protection Authority Victoria (EPA) has granted Australian Paper a works approval to develop a large-scale, waste to energy facility in Victoria.

The facility is proposed to be co-located within the boundaries of the Australian Paper site in Maryvale, Latrobe Valley and process residual municipal solid waste, and industrial and commercial waste.

The plant would generate steam and electricity that can be directly used in the paper mill and its operations or power exported to the grid. As proposed, it would replace two existing gas-fired boilers, produce approximately 30 megawatts of electricity and 150 tonnes per hour of steam and would result in a 13 million tonne net reduction of greenhouse gases through its lifetime.

Related stories:

EPA’s assessment of the application considered issues such as use of best practice technology, energy efficiency and greenhouse gas emissions, waste fuel composition, compliance with waste hierarchy, the principles of the Environment Protection Act 1970, environmental management and potential risks to human health and the environment including emissions to air, noise, disposal of fly ash, the wastewater treatment system and operational contingencies.

EPA Executive Director of Regulatory Standards, Assessments & Permissioning Tim Eaton said EPA’s decision followed many months of consultation and research including taking in 128 submissions and reviewing additional information. The statutory deadline for decision was 28 November.

“The project is highly complex and with so many submissions it was clear that thorough consultation would be needed especially with the community most directly involved,” said Mr Eaton.

The company’s full application, assessment and the responses to the submissions will be made publicly available here.

“Approval of the application means that EPA has satisfied itself that the project can be built to meet the requirements of the Environment Protection Act 1970 and all relevant policies and regulations to protect human health and the environment from the harmful effects of pollution and waste,” he said.

 

Australian Paper now requires further approvals, including a planning permit from Latrobe City Council and securing waste contracts. Completion of final detailed design, construction and commissioning will all need to be consistent with the works approval before Australian Paper can apply for an EPA operating licence.

 

Community comments called for Australian Paper WtE facility

EPA Victoria has called for further community consultation on Australian Paper’s proposal to develop a large-scale waste to energy facility.

The company has provided the EPA with a health impact assessment to support its application to develop the facility within the boundaries of its site in Maryvale, Latrobe Valley.

Related stories:

The proposed plant would generate both steam and electricity which can be directly in the paper mill or exported to the grid. It would replace two gas-fired boilers and would produce around 30 megawatts of electricity and 150 tonnes of steam per hour.

The EPA’s assessment of the applications will consider issues such as best practice technology, energy efficiency and greenhouse gas emissions, waste fuel composition, compliance with waste hierarchy, potential risks to human health and the environment from air, noise, disposal of fly ash, wastewater treatment and operational contingencies.

It follows a community public meeting held earlier in July, which found there was significant support for the proposals, with many submitters commenting the technology is already operating safely overseas, there are environmental benefits of less waste going to landfill and economic benefits of local job creation.

EPA Development Assessments Director Tim Faragher said the works approval application was originally open for public comment in June and EPA received 115 submissions.

“EPA also ran a community conference in July to hear concerns from those that made submissions. This further consultation period allows interested community members to make further comments on the new information that Australian Paper has submitted,” Mr Faragher said.

When making a final determination, the EPA will also consider all public submissions and the outcomes of the community conference.

EPA VIC hold public meeting for waste to energy facility

The Environment Protection Authority (EPA) Victoria will hold a public meeting after receiving a works approval application from Australian Paper to develop a large-scale waste to energy facility.

The facility is proposed to be co-located within the boundaries of the Australian Paper site in Maryville, Latrobe Valley.

Related stories:

Australian Paper propose the facility would accept and use an estimated 650,000 tonnes a year of municipal solid waste and commercial and industrial waste from the Melbourne and Gippsland regions.

In order to begin works, a works approval is required from EPA for any waste management activities that have the potential for significant environmental impacts.

EPA Director of Development Assessments Tim Faragher said EPA Victoria will now hold a section 20B Conference under the Environmental Protection Act 1970 to ensure it understands the views of the community regarding the works approval application.

The Section 20B Conference will be independently chaired and a report produced detailing key issues and possible solutions raised in written submissions and at the conference. This report, which will be made available online, will be used by EPA to inform its decision on whether or not to approve the works approval application,” he said.

The conference will be held on 25 July 2018 at the Premier Function Centre, 29 Grey Street, Traralgon at 6pm.

EPA VIC to consider waste to energy plant

A large-scale waste to energy plant could be on the way for Victoria, as manufacturing company Australian Paper has lodged a works approval application with Environment Protection Authority (EPA) Victoria.

The facility is proposed to be co-located within the boundaries of the Australian Paper site in Maryvale, Latrobe Valley.

Related stories:

Australian Paper propose the facility would accept and use an estimated 650,000 tonnes a year of municipal solid waste and commercial and industrial waste from the Melbourne and Gippsland regions. Waste will be collected from the existing waste collection network and transferred to the site via road and rail.

The proposed plant would generate both steam and electricity which can be used in the papermill to power its operations or exported to the grid. The plant would replace two existing gas-fired boilers and produce around 30 megawatts electric and 150 tonnes per hour of steam.

EPA Executive Director Assessments Tim Eaton said the application is the first in Victora for a large-scale energy from waste plant using municipal solid waste.

“EPA invites the community and interested parties to review the application and make submissions which will be considered in EPA’s assessment of the application,” he said.

“EPA’s assessment of the application will consider issues such as use of best practice technology, energy efficiency and greenhouse gas emissions, waste fuel composition, compliance with waste hierarchy, environmental management and potential risks to human health and the environment including emissions to air, noise, disposal of fly ash, the wastewater treatment system, and operational contingencies.”

Members of the community have until 27 June to lodge submissions to the EPA.

The application and a summary of it can be found here.