FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)
Finance Estimate
From $459.14*
per week
From 8.09% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $459.14*
per week
From 8.09% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP) |
| Type | Machinery Attachments |
| Sub Type | Slashers |
| Make | FIELDQUIP |
| Model | MULTICUT 650 FLEX WING SLASHER (MIN 90HP) |
| Sale Price | $97,790 |
| Listing Type | New |
| Stock Number | MULTICUT620FW |
| RefCode | TA1124956 |
| Category | Folding Wing |
| Cutting Width - mm | 6280 |
| Cutting Height - mm | 25-210 |
| Tractor Connection | Trailed |
| Power Rating - kW | 67 |
| Power Rating - Hp | 90 |
| PTO Drive - RPM | 1000 |
| Length - mm | 5070 |
| Width - mm | 6470 |
| Weight - kg | 2850 |
Description
The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.
Related Listings
View More2
$16,511
FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP
- » Listing Type: New
- » Cutting Width - mm: 1,800
- » Tractor Connection: Linkage
- » Power Rating - Hp: 150
Delivery Australia Wide
4
$6,809
FIELDQUIP XLE SERIES SLASHERS 1.5M - SUIT 60-100HP
- » Listing Type: New
- » Tractor Connection: Linkage
- » Power Rating - Hp: 100
Delivery Australia Wide
2
$8,464
FIELDQUIP LE SERIES SLASHERS 2M - SUIT 50-75HP
- » Listing Type: New
- » Cutting Width - mm: 2,000
- » Tractor Connection: Linkage
- » Power Rating - Hp: 75
Delivery Australia Wide
2
$6,770
FIELDQUIP LE SERIES SLASHERS 1.8M - SUIT 45-75HP
- » Listing Type: New
- » Cutting Width - mm: 1,800
- » Tractor Connection: Linkage
- » Power Rating - Hp: 75
Delivery Australia Wide
Dealer's Other Listings
View More2
$3,297
FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP
- » Listing Type: New
- » Cutting Width - mm: 1,200
- » Tractor Connection: Linkage
- » Power Rating - Hp: 40
Delivery Australia Wide
4
$7,386
FIELDQUIP XLE SERIES SLASHERS 1.8M - SUIT 60-100HP
- » Listing Type: New
- » Tractor Connection: Linkage
- » Power Rating - Hp: 100
Delivery Australia Wide
4
$9,119
FIELDQUIP XLE SERIES SLASHERS 2M - SUIT 60-100HP
- » Listing Type: New
- » Tractor Connection: Linkage
- » Power Rating - Hp: 100
Delivery Australia Wide
2
$3,624
FIELDQUIP SABRE SERIES SLASHERS 1.5M - GALVANISED DECK, SUIT 20-40HP
- » Listing Type: New
- » Cutting Width - mm: 1,500
- » Tractor Connection: Linkage
- » Power Rating - Hp: 40
Delivery Australia Wide
