2022 ISUZU FINSBURY HP125X100-250

Engine details:
Engine make: Isuzu diesel engine
Engine model: 4JG1PK PRM
Full power: 33.9kw @ 2000rpm
Fuel consumption: 7L/hour approx. (to be confirmed)
Fuel tank capacity: 250 Litres
Base size: 2400 x 900 x 150mm complete with a central lifting frame, this base is ready to be bolted onto either an optional Skid base or road trailer base.
Control panel: Standard industrial start / stop control panel. Complete with a battery isolator, ignition isolator, steel battery box and an emergency stop button. The pump set will also be fitted with two LED lights.

Pump and Trailer details:
Pump Model: HP125X100-250A-ADP50-EI2000W
Type: Poseidon Auto Prime Dry run centrifugal pump, complete with a 50cfm Smartprime vacuum diaphragm pump and a Poseidon mechanical seal oil bath, dry running system.
Duty flow: 50L/sec (best efficiency point @ 2000rpm)
Maximum flow: 63L/sec @ 2000rpm
Duty head: 40m (best efficiency point @ 2000rpm
Maximum head: 48m @ 2000rpm
Nominal pump speed: 2000rpm
Maximum curve power: 31.5kw
Duty point power: 28.5kw
Self-priming capacity: to 8.4m (but is depended on flow is reduced on higher flows)
Pump build: - Casing: Ductile iron
- Impeller: Cast iron
- Shaft: 431 Stainless Steel
Pump inlet size: 125mm enlarged with a hot dip galvanized reducer up to 150mm. the reducer is fitted with a 150mm female Bauer fitting.
Pump outlet size: 100mm fitted with a hot dip galvanized male Bauer fitting and a 100mm butterfly valve for throttling / regulating the pump flow.
Road trailer base: a hot dip galvanized single axle trailer chassis with an ATM of 1600kg. the pump is set to be mounted in this trailer chassis.
Other trailer features:
-ATM 1600kg with mechanical disc brakes
-Heavy duty, double rolled, chequer plate mud guards
-Slipper spring assembly painted
-100% Australian drawbar steel
-100% Australian chassis steel
-Fully welded chassis
-Solid axle painted (1045 Duraflex steel)
-Brand new light truck tyres with spare
-Quality Japanese bearings
-Spring hangers welded to flat bar (for added strength)
-Ho dip galvanized finish
-ADR approved LED lights
-Soldered and heat shrunk wiring
-Front and side reflectors
-9 x 10 Finsbury trailer mud flaps
-Rated stamped safety chain
-Allowed for an 8 heavy duty jockey wheel
-SA govt. trailer inspection

Additional items:
-a hot dip galvanized vandal proof enclosure, lockable and complete with a zinc plated roof, fitted t cover the full pump
-to supply and fit a hot dip galvanized trailer hose holder for 4 x 6 suction hoses
-to extent the trailer base (to fit toolbox) and fit a lockable 1400 x 700 x 800mm aluminum toolbox in front of the engine
-add a 4.5kg powder extinguisher mounted in a sturdy holder
-supply 6 corrugated suction hose sections x 3 to 3.2m long fitted with male and female Bauer fittings
-supply 4 red lay flat delivery hose sections x 20m long, fitted with male and female Bauer fittings
-solar battery charging unit
-amber rotating beacon