MAC 111/2 baler

The MAC 111/2 baler is characterised by its long-lasting, robust and easy maintenance capabilities.

Following the success of the MAC 2 range, the MAC 111 is now available with updated features and extended channel sections for higher compaction.

Available through Australian distributor CEMAC technologies, the baler has been designed to treat large quantities of material in a short space of time, including paper, PET, metals and refuse-derived fuel.

Using 15-millimetre Hardox 450 steel, bolted as opposed to welded for easy changeover, total protection of the internal parts of the baler is achieved, increasing the lifetime of the machine.

Using REXROTH variable flow pumps and high efficient IE3 electrical drives, Macpresse also further improved the hydraulic block for better wear resistance and counter pressure control.

The trolley runs on eight high strength bearing side rollers with enlarged diameters. The ram features hinged front guards to stop wire blockages.

In terms of compacting ability, the compacting cylinder provides a thrust of 170 tonnes at 320 bar, completing a full forward/baling/return cycle in 12 seconds with material.

Additionally, a movable tying unit connected to a hydraulic cylinder can be used during the cutting and twisting phase of the wires, proving to be particularly useful for difficult-to-bale materials. The machine can be optionally equipped with a POLY-TIE wire tying system.

SSE Europa also offers a Siemens TP1200 operating panel and software for real-time diagnostics.

Send this to a friend